We identified the need to use magnetic technology to manufacture several similar parts on our turning centers.  After careful research before and during the 2012 IMTS Show, D.P. Tool selected DocMagnet to help us with our clamping requirements.  We had the opportunity to sit down with the DocMagnet Team at the IMTS Show and they developed a custom 18” & 36” Diameter Magnetic Chucks to be used on our current equipment.  Their pricing, service and technical support exceeded our expectations.  They provided the technical expertise and safety factor formulas that gave our team the confidence to trust in the holding power of a magnetic system.  As a result our productivity has increased and the payback time on the equipment would make an accountant smile.  Take the Magnetic Leap and you will be a believer… Consider partnering with DocMagnet on your next clamping challenge.

David, Vice President, D.P. Tool


Our experience with DocMagnet here at Volvo Group Trucks was excellent. The application support could not have been better. The DocMagnet Team visited us on site to review the application and options. I also appreciated the access to parametric modeling which aided the speed of the design as well as the functionality of the product. Our particular magnet needed to be Viagra for sale accessible to a small assembly and a variance inspection laser. Without solid models the design could have been much more time consuming.

Clint, Manufacturing Engineer, Volvo Group Trucks Operations


Thanks for all your help setting us up with the Multi-Flux Machining Magnet for our Makino F-5. This magnet has been essential for saving us set up time and in turn allowing us to push more machining through. It has been most beneficial with the multi-cavity mold work we do. We’re not limited to  only running two pieces because that’s all the table space we could use because of vise size. Now we’re setting up 8 or 16 pieces at a time right on the magnet and running through the night. Rob appreciates not having to stop in at 10 PM to swap parts out. Your support has been outstanding. It was a help understanding how the magnetism travels and utilizing it specifically for different machining purposes.

Frank, Tooling Engineer, Turning Point Tool